- Home/
- Products & Services/
- Enterprise Networking/
- Ethernet Access Device (EAD)
Carrier ethernet access solution for enterprise and wholesale ethernet services
How to activate new Carrier Ethernet Services?
Activating a new Carrier Ethernet circuit traditionally means sending a technician out with external test equipment to validate throughput and SLA compliance before the service can go live. Ekinops Ethernet Access Devices (EAD) build that testing capability directly into the box: RFC 2544 (the industry-standard network performance benchmark) and Y.1564 (the standard test for validating a new service before it goes live) run natively on the device, alongside OAM (Operations, Administration, and Maintenance) reflectors and end-to-end performance monitoring. A circuit can be activated, verified, and monitored from the same unit that carries the traffic, without external tools or a second visit to the site.
-
Enterprise & Regional Office Connectivity
Deliver certified 1G or 10G Carrier Ethernet services to mid-size and large enterprises over fiber. -
Circuit Activation Without Truck Rolls
Get a new circuit live and verified in a single visit, without waiting on a separate specialist and external test equipment to sign it off. -
Business Continuity for Critical Sites
Keep revenue-critical sites online through a fiber outage, without standing up and managing a separate backup connection.
What this brings to your network
Choose the platform that fits your site
FIBER 1 GBPS
FIBER 10 GBPS
CERTIFIED
Gigabit demarcation for mid-size enterprises and regional offices
- Fanless, compact design with dual power supplies, rack or wall-mountable.
- Handles up to 64 Ethernet virtual circuits (EVCs).
- Optional built-in 4G or 5G cellular backup if the fiber connection fails.
- Optional software license adds Layer 3 IP routing to the same unit, alongside Layer 2 demarcation.
10G demarcation and aggregation for larger sites and operators
- Built on a 50 Gbps internal Ethernet switch, with redundant, hot-swappable power supplies on rackmount versions.
- Handles up to 254 Ethernet virtual circuits (EVCs).
- Available in a demarcation configuration or an aggregation configuration for consolidating multiple Gigabit links onto a 10G WAN connection.
- Optional Layer 3 IP routing license for high-speed routing at wirespeed.
Certified for every standard Carrier Ethernet service type
- Certified for E-Line, E-LAN, E-Tree, E-Access, and E-Transit service types.
- Validates new circuits on-device using RFC 2544 and Y.1564, no external test gear required.
- Monitors hundreds of OAM sessions simultaneously without degrading the control processor.
They connect their Ethernet networks with Ekinops
-
“We are extremely pleased by the operational efficiency that the 1651 remote SAT testing has provided. Instead of rolling a truck to each site and using dedicated test equipment, we can use the built-in generator/reflector validate SLA on demand.”
Ben RussellChief Technology Officer at Stratus Networks
-
“Thanks to Ekinops’ CPE solutions tailored to our requirements, we are systematically developing our service offering while at the same time achieving sustainable cost savings. Reducing the number of CPE models we use gives us additional flexibility, simplifies management across the entire device lifecycle and improves the customer experience.”
Martin FischerCTO of 1&1 Versatel
Which model do I need, the 1 Gbps or the 10 Gbps platform?
It depends on your bandwidth requirement. The 1 Gbps platform covers Gigabit demarcation for mid-size enterprises and regional offices, up to 64 Ethernet virtual circuits. The 10 Gbps platform covers larger sites, or aggregation of multiple Gigabit links for operators, up to 254 Ethernet virtual circuits.
Can I add IP routing later, or do I need to decide at purchase time?
You can add it later. Layer 3 IP routing is enabled through a software license on the same physical unit, so you can start with Layer 2 demarcation only and add routing when you need it, without a hardware change.
Can I manage these devices with the tools we already use for the rest of our network?
Yes. Ethernet Access Device (EAD) devices support standard CLI and SNMP for traditional environments, and NETCONF/YANG for automated orchestration platforms, so they fit into the management approach you already use rather than requiring a new one.
Why does MEF 3.0 certification matter to us as a buyer?
It’s an independent guarantee that the E-Line, E-LAN, E-Tree, E-Access, and E-Transit services we deliver meet the industry’s interoperability and performance standards, so you’re not relying solely on our own claims when evaluating service quality.


