Learn more about the OneAccess portfolio : an extensive range of physical or virtualized access platforms: multi-service routers, Ethernet access devices, white-box CPE and VNFs for the agile delivery of managed enterprise services
Learn more




100G aggregation module


Pluggable 100G muxponder with 10 multiprotocol SFP+ client ports. Single pluggable QSFP28 G.709 OTU4 line side port. Used for efficient aggregation of 10 x 10G services onto 200G line (requires PM 200FRS02 (-SF)) or to interface with any OTN network.

The EKINOPS PM 100G-AGG is a multiprotocol aggregation module that allows network operators to deliver a wide range of connectivity and managed services. Designed as a companion card to the EKINOPS PM 200FRS02, it aggregates up to ten lower speed services on to a single 100G optical carrier for greater bandwidth and spectral efficiency. The combination of the two modules provides extensive service flexibility to the network by providing a low cost on-ramp for 10G services to a high speed 100G or 200G link.

The 100G line is G.709 OTU4-framed and allows the signal to be handed off natively as a client either to the EKINOPS PM 200FRS02 to be further aggregated to a 200G coherent line or, alternately, to an OTN switched core.

This approach is designed to provide a modular, cost-efficient approach to multiplexing 10G services onto a 200G wavelength. It also allows the operator to add services quickly by simply plugging in a new client optic without having to turn up a new wavelength.

The EKINOPS PM 100G-AGG provides ten SFP+ client interfaces supporting 10GbE, OTU2/OTU2e, 8G/10G/16G Fibre Channel, OC-192/STM-64. Occupying two slots in either EKINOPS’ C200HC or C600HC chassis, up to two modules can be co-located with their companion EKINOPS PM 200FRS02 in a single 2RU shelf.

Figure: Service flexibility using EKINOPS PM 100G-AGG and PM 200FRS02 for <em>(a)</em> pure 10G or <em>(b)</em> combined 10G and 100G aggregation to 200G line
Figure: Service flexibility using EKINOPS PM 100G-AGG and PM 200FRS02 for (a) pure 10G or (b) combined 10G and 100G aggregation to 200G line


The EKINOPS PM 100G-AGG module can be managed through SNMP or via the EKINOPS standard element level management interfaces, which include a Command Line Interface (CLI) and an EKINOPS java-based Graphical User Interface (GUI). The CLI is accessible via Secure Socket Shell (SSH) and Telnet remotely or via a local serial port locally on the management board.

Complete performance monitoring and management are provided, including laser shutoff and local and remote loopback, which is useful for maintenance and fault isolation.

Digital Diagnostics Management (DDM) is supported for SFP+ and QSFP28 interfaces. This includes link status, transmit (TX) and receive (RX) signal power monitoring, and operational temperature, as well as manufacturer and transceiver model information essential for inventory management. The EKINOPS PM 100G-AGG module is also supported by Celestis NMS, the EKINOPS advanced Network Management System.

  • Efficient 10G and 40G services aggregation to 100G line
  • SFP+ client ports with multiprotocol support:
    - 10GbE; OTU2/OTU2e;
    - 8G/10G/16G Fibre Channel;
    - OC-192/STM-64
  • OTU4 line output simplifies higher order aggregation to 200G
  • Increased bandwidth utilization
  • Carrier managed services
  • Ethernet business services
  • Campus connectivity
  • SAN-based backup and recovery
  • High speed backhaul

Latest News

  • EKINOPS enables seamless IP migration of ISDN services for Hutchison Drei Austria

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading provider of open and fully interoperable Layer 1, 2 and 3 solutions to network operators, today announces it has enabled Hutchison Drei Austria ("Drei") to continue offering legacy ISDN services (delivered over traditional public telephone lines) during its migration to an IP-based system, preventing service disruption for customers.

  • EKINOPS Announces 600G FlexRate Solution

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of optical transport equipment and router solutions for service providers and telecom operators, today announces its new PM 400FRS04-SF flexible rate line module.  This new module triples the capacity of EKINOPS highly successful 200G FlexRate solutions and delivers new levels of flexibility to address market demand for advanced transport capabilities.

  • €84.2m in revenue in 2018, exceeding the annual target

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading global supplier of telecommunications solutions for telecom operators, has published its consolidated revenue for 2018. OneAccess and its subsidiaries have been fully consolidated in the Group financial statements since October 1, 2017.


EKINOPS Worldwide

Telephone +33 (0)1 77 71 12 00

Telephone +1 (571) 385-4103



Receive automatically EKINOPS information in your inbox!