EKINOPS en français



PM 200FR20 (-SF)

100G/200G FlexRate pluggable Muxponder

PM 200FR20 (-SF)

Pluggable 100G/200G multiprotocol, multirate, multireach muxponder with twenty multiprotocol SFP+ client ports. Multiple configuration options (20 x 10G; 2 x 40G + 12 x 10G; 4 x 40G + 4 x 10G). Single integrated coherent FlexRate 100G/200G line port with DynaFEC and SD FEC. Used for transmission from 10Km to 10,000Km. -SF versions compatible with single fiber bi-directional operation.

EKINOPS continues to advance the capabilities of its coherent high-speed modules with the EKINOPS PM 200FR20 that provides flexible line rate functionality to deliver up to 400G of capacity in a single shelf. Using advanced Digital Signal Processor (DSP) technology, the EKINOPS PM 200FR20 supports both the 16QAM and DP-QPSK modulation formats with the software flexibility to select either for a 100G or 200G line rate, depending on your requirements for capacity and distance. In DP-QPSK format, the PM 200FR20 can transport 100G up to 10 000 km but can be used for shorter metro-regional spans as well. In 16QAM format, it can transport 200G up to 1000 km. The EKINOPS PM 200FR20 is also available in a single fiber variant supporting transmit and receive of different channels on the same module over a single strand of fiber.

With this flexibility, network operators can use the same line card for multiple applications no matter what the span requirements are, helping them simplify sparing, streamline logistics and speed ordering and replacement, all of which result in lower operational costs. It also allows the operator to easily double capacity on any link simply by upgrading the existing module. This process can be easily accomplished from a remote Network Operations Center (NOC) using a simple firmware download. There is no need to roll a truck or dispatch a technician to replace hardware or move patch cords.

The module also has a high degree of service flexibility with multiprotocol client support including 10GbE, 8G FC, 10G FC, 16G FC, OC-192/STM-64, OTU2 and OTU2e. The EKINOPS PM 200FR20 supports 20 SFP+ client ports.

The module is ultra-compact delivering either 2x100G or 2x200G in only 2RU and highly power efficient. Combining this with ease of operation, unmatched price points and superior performance, EKINOPS makes your choice easy when it comes to coherent transport solutions.

Figure: EKINOPS PM 200FR20 multireach capability


The EKINOPS PM 200FR20 and PM 200FR20-SF modules can be managed through SNMP or via the EKINOPS standard element level management interfaces, which include a Command Line Interface (CLI) and an EKINOPS java-based Graphical User Interface (GUI). The CLI is accessible via Secure Socket Shell (SSH) and Telnet remotely or via a local serial port locally on the management board.

Complete performance monitoring and management are provided, including laser shutoff and local and remote loopback, useful for maintenance and fault isolation.

Digital Diagnostics Management (DDM) is supported for the SFP+ interfaces. This includes link status, transmit (TX) and receive (RX) signal power monitoring, and operational temperature, as well as manufacturer and transceiver model information essential for inventory management. A 10 Mbps in-band Data Communications Channel (DCC) is embedded in the line side for remote management.

The EKINOPS PM 200FR20 and PM 200FR20-SF modules are also supported by Celestis NMS, the EKINOPS advanced Network Management System.

  • Provides 400G of throughput capacity
  • Built-in Variable Optical Attenuator (VOA) allows the operator to remotely select the output power level
  • Increases fiber capacity by 200%
  • Software selectable line side modulation — DP-QPSK or 16QAM
  • Multiprotocol support includes 10GbE, 8G/10G/16G FC, OC-192/STM-64 and OTU2/OTU2e client interfaces
  • Simplifies sparing requirements
  • Compatible with multiple channel spacings — both on-grid and off-grid
  • Low cost pluggable client optics 20xSFP+
  • Support for up to 88 200G channels
  • Small form factor
  • Highly power efficient
  • Single fiber deployments
  • Multireach transport — Metro Regional, Long Haul and Ultra Long Haul
  • Data Center Interconnection
  • Multiprotocol service aggregation
  • Alien wavelength capacity upgrade

Latest News

  • EKINOPS Hires New CTO

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of telecommunications solutions for telecom operators and businesses, announces the appointment of Vincent Munière as its new Chief Technology Officer and Vice President of Research and Development (CTO and VP of R&D). He will strengthen the EKINOPS technology vision, accelerate software innovation and lead the Group’s engineering and support team.

  • EKINOPS Announces Partnership Agreement with Lanner

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading provider of open, future-proof and flexible solutions for the access network, today announces the completion of a partnership agreement covering North America and Mexico between EKINOPS and Lanner Electronics, the global leader in Whitebox Solutions™ for SD-WAN, uCPE, vCPE, and MEC platforms.

  • Robust profitability for EKINOPS in H1 2020: EBITDA margin over 14% despite a turbulent environment

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of telecommunications solutions for telecom operators and businesses, has published its first half 2020 financial statements (for the period ended June 30, 2020) as approved by the Board of Directors on July 27, 2020. The statutory auditors have conducted a limited review of the first half financial statements and will shortly issue the corresponding report.


EKINOPS Worldwide

Telephone +33 (0)1 77 71 12 00

Telephone 800-670-2618



Receive automatically EKINOPS information in your inbox!