Menu

EKINOPS en français

PRODUCTS

EKINOPS360 PLATFORM

PM C1001HC

10G Metro, Regional and Long-Haul Transponder & Regenerator

PM C1001HC

Pluggable 10G transponder with a single multiprotocol SFP+ client port. Single pluggable XFP line side ports with DynaFEC. Used for long haul transport of 10G services.

The EKINOPS PM C1001HC transport module is part of the EKINOPS 360 platform and are used as OC-192/STM-64/10GbE/10G FC signal regenerators or as metro, regional, or longhaul DWDM transponders. The PM C1001HC serves as a regional long haul transponder and the PM1001RR serves as a metro, regional, or long haul regenerator as well as a metro transponder.

The PM C1001HC supports OC-192/STM-64 and 10 GbE LAN/WAN on the client side and a 10G uplink on the line side (11.09G with 10dB FEC).

Management

The EKINOPS PM C1001HC module can be managed through SNMP or via the EKINOPS standard element level management interfaces, which include a Command Line Interface (CLI) and an EKINOPS java-based Graphical User Interface (GUI). The CLI is accessible via Secure Socket Shell (SSH) and Telnet remotely or via a local serial port locally on the management board.

Complete performance monitoring and management are provided, including laser shutoff andlocal and remote loopback, useful for maintenance and fault isolation.

Digital Diagnostics Management (DDM) is supported for XFP interfaces. This includes link status, transmit (TX) and receive (RX) signal power monitoring, and operational temperature, as well as manufacturer and transceiver model information essential for inventory management.

The PM C1001 and PM C1001HC additionally provide full SONET/SDH performance monitoring and Ethernet RMON statistics. Also in the PM C1001HC, a 10 Mbps in-band Data Communications Channel (DCC) is embedded in the line side for remote management.

The EKINOPS PM C1001HC module is also supported by Celestis NMS, the EKINOPS advanced Network Management System.

10G PM C1001 DWDM Transport
Up to 300km without in-line Amplifiers & More than 2 000km with in-line Amplifiers
  • Industries best performing FEC, 10 dB 10G Transponder for short and long haul applications
  • Supports OC-192/STM-64, 10GbE LAN PHY and WAN PHY, 10 GFC and OTU2
  • XFP line interface (1310 nm, 1550 nm or DWDM)
  • Supports DWDM configurations up to 88 channels
  • Link distances up to 300 km without in-line amplifiers and with full channel counts
  • Distances of more than 2000 km for multi span DWDM applications with full channel counts
  • Digital Diagnostic Monitoring and management via SNMP
  • Remote management through embedded 10 Mb DCC (PM C1001HC)
  • Hot swappable
  • Wire speed performance with low latency and jitter

The EKINOPS PM C1001HC can be used to transport 10G traffic in Metro Regional and Long haul DWDM networks. It can also be used to increase capacity of existing WDM networks. Configured with an ITU DWDM optic it can be connected directly to a DWDM MUX of an existing WDM system and transport additional data at a 10G rate over an additional wavelength. EKINOPS PMC1001HC modules can also be used back to back in regeneration sites of long haul networks.

The PM C1001HC provides an SFP+ client interface and an XFP line interface only. It is also available in an Extended Temperature Range (ETR) version for use in EKINOPS C200HC-ETR chassis. The PM C1001HC-ETR operates in environmentally harsh locations from -40°C to +65°C (-104°Fto +149°F).

To further enhance long haul performance, the PM C1001HC includes a transport overhead (lightwrapper) that provides operation, administration and maintenance capabilities and enhanced Forward Error Correction. Ekinops’ implementation of DynaFEC (10 dB) reduces the number of transmission errors on noisy links and enables deployment of longer optical spans. Thus, it improves transport performance and drastically increases bandwidth capacity at a low cost.

  • Wireless back haul
  • Triple or Quadruple play
  • Business Ethernet Services
  • Metro, Regional and Long Haul optical networks
  • 10G distance extension
  • DWDM Infrastructure
  • Upgrade existing CWDM and DWDM networks

Subscribe

Latest News

  • EKINOPS completes the acquisition of OTN technology from Padtec

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of telecommunications solutions for telecom operators, today completes the acquisition of the OTN-Switch (Optical Transport Network) platform developed by Padtec, an optical communications system manufacturer based in Brazil.

     
  • A record 2nd quarter with sequential growth of 17%. H1 2019: revenue of €45 million and expected improvement in EBITDA margin

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of telecommunications solutions for telecom operators, has published its revenue for the second quarter of 2019.

     
  • EKINOPS Launches Channel Partner Program in EMEA and APAC

    EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of optical transport equipment and router solutions, today announces the launch of the EKINOPS Channel Partner Program (ECPP). The program has been designed to support value-added resellers (VARs) and system integrators to differentiate in the market by providing them with the opportunity to build, sell and deliver solutions tailored to their customer needs, while still benefitting from the Ekinops’ extensive knowledge, resources and expertise.

     

EKINOPS Worldwide

EKINOPS EMEA & APAC
Telephone +33 (0)1 77 71 12 00

EKINOPS AMERICAS
Telephone +1 (571) 385-4103

 

E-MAIL ALERTS

Receive automatically EKINOPS information in your inbox!