It is widely understood that first-wave SD-WAN was conceived as an OTT solution, driven by two fundamental assumptions: the underlying network is both insecure and unreliable. Based on these assumptions, SD-WAN solutions have developed their functions to frequently assess network quality and define ultra-responsive solutions in instances of quality degradation.
These assumptions, and the functions created in response have, however, created a mode of SD-WAN that is problematic and unsustainable.
While these functions may benefit some specific use cases, the cost-efficiency balance of these additional quality monitoring functions is skewed for most. Especially in instances where a customer is using MPLS, a network secured and reliable by nature.
A more balanced, mature approach is needed to enable the wider market to make the business case for, and truly reap the benefits of, SD-WAN. Currently, there are three major challenges SD-WAN is creating that are applying pressure to the network infrastructure: network traffic monitoring, outbound measurement and active probing, and encryption by default.
The Top 3 Network Pressures Created by SD-WAN
# Network traffic monitoring
As an unwelcome side effect of network traffic monitoring introduced by SD-WAN, networks often suffer from packet duplication to clear up and improve the quality of the traffic sent down the network. However, in turn, this inadvertently consumes more capacity…
# Outbound measurement & active probing
Another challenging function is outbound measurement, a system that performs active probing and generates useless traffic when none is available. The most capacity-hungry solutions can consume up to 50Gb over two weeks in a single WAN interface.
# Encryption by default
There is also a strong recurrence of ‘encryption by-default’, where areas of the network are overlaid and encrypted without assessment of importance or critical need. As a result, even on a secured and reliable network such as MPLS, the overall frame size and once again, bandwidth required, is needlessly increased.
Too often, these solutions are too sophisticated for their own good. And as a result, they are putting significant bandwidth pressure on the network.
A Chicken and Egg Situation
SD-WAN is set to keep growing – with Gartner estimating 60% adoption by 2024 – but at this rate, we’re facing another network capacity issue. In its current incarnation, SD-WAN could end up requiring two or three times the bandwidth of normal traffic, becoming a primary contributor to poor network performance, that would then require yet more SD-WAN to compensate…
Many will continue to point to underlying network insecurities to justify their position but in truth, there needs to be a more critical assessment of what lies ahead. Irrespective of OTT supplier profits, this approach is unsustainable and irresponsible for building a futureproof network. Especially considering the world we find ourselves in today, with network demands higher and more diverse than ever before.
In fact, the COVID-19 crisis and the response of service providers has strongly demonstrated just how reliable and trustworthy underlying infrastructures are.
Why champion CSP infrastructure for SD-WAN
Recognizing the strength of this underlying infrastructure sits at the core of this balance. And it is this that will also be crucial in making SD-WAN finally accessible to smaller players such as enterprises and SMEs who, up until now, have struggled to make the business case.
While ‘off the shelf’ SD-WAN solutions have commonly required additional hardware, new solutions are emerging that build SD-WAN as an extension of the existing hardware and core routing functions.
EKINOPS SD-WAN Xpress is leading this change as the market’s first SD-WAN solution delivered as an extension of a routing function. By leveraging the foundational network and existing security, SD-WAN is more efficient, sustainable, and accessible.
Here are six key considerations needed to enable a more ‘network friendly’ SD-WAN:
# Minimize Disruption
By adding SD-WAN as a feature to EKINOPS proven middleware OneOS6, operators already with OneOS6-enabled boxes in the field can migrate to SD-WAN whenever suits them, without impact on their legacy network or needing to implement new CPE equipment.
# Leverage Existing Features
SD-WAN Xpress leverages OneOS6 features already used by service providers in specific instances where advanced Quality of Service (QoS) is needed. By simplifying configuration and deployment of these, customers can utilize these features - all already within ‘bandwidth budget’ - to deliver an overall improved Quality of Experience (QoE).
# A Double-sided Approach
By using a hybrid ‘double sided’ deployment - one legacy, one SD-WAN – operators can minimize the risk of disruption to existing MPLS services, while limiting additional traffic only to the area of additional connectivity. This offers a low-cost means to benefit from additional connectivity when needed, without compromise.
# Streamline Optimization
By following the MEF Business Intent Overlay to classify and prioritize applications, SD-WAN Xpress relies on the underlying network performance protocol to self-adapt. This built-in system removes the need for advanced WAN optimization on top in most standard cases. Removing this optimization can avoid adding between 30 to 100% of additional load on a network.
# A Single-View Solution
With everything supported on a single device, the service provider has total control. No more complex troubleshooting trying to understand if the underlay, CPE or SD-WAN device is the one with the issue. Instead, service providers are empowered with a total end-to-end view, without the need for complex multi-point log collection and reconciliation.
# Real-time Traffic Steering … Only if Required!
In many instances, SD-WAN is required only to get a secured link over the internet but often, operators are saddled with considerably more complex solutions than needed, adding complexity, cost, and pressure on networks. With two service models to choose from, Xpress and Prime, players can select the level of service they need, optimize their pricing for the Enterprise and get real-time traffic steering only if it’s needed.
Now more than ever, networks are critical to business continuation. And to many enterprises and SMBs, SD-WAN can be crucial to enabling the agility needed to change their network behaviours and adapt quickly in adverse situations. Designed with the needs of SMEs or small sites of large enterprises in mind, EKINOPS is offering a radically more competitive, dynamic and sustainable model for deploying SD-WAN.
EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading supplier of optical transport and enterprise connectivity solutions, today announces the launch of SD-WAN Home Office Connect, a compact networking solution tailored to support enterprises in overcoming the performance, security and legal challenges of managing remote working.
EKINOPS (Euronext Paris - FR0011466069 – EKI), a network access and virtualization specialist, today announces that Swisscom (Bern/CH), a leading ICT company in Switzerland, has selected EKINOPS to deliver a new virtualized network solution on uCPE (universal Customer Premises Equipment).
EKINOPS (Euronext Paris - FR0011466069 – EKI), a leading provider of open, future-proof and flexible networking solutions to service providers and telecom operators, today announces the certification of the EKINOPS OneOS6-LIM (Operating System and software Local Infrastructure Manager), with the Lanner NCA-1515/L-1515 on the Verizon Wireless Network. The certification under the Verizon Wireless Open Development Initiative (ODI) program allows a product to connect to the Verizon Wireless Network.